5mm RGB Red/Green/Blue LED

Three for one, a red, green, and blue LED, all in one familiar 5mm package. Operating specs are as follows:

Colors:
Red: 620-630nm
Green: 515-525nm
Blue: 460-470nm
Voltages:
Red, 1.8-2.2V
Green: 3.0-3.4V
Blue: 3.0-3.4V
Max current:
Each: 10mA, max 50mW

See alternate photos for pinout.

7-Segment 3-Digit LED Display, 0.36", Green

Nice basic LED display. Available in common anode or cathode.

Cree Sk68 3W LED Flashlight

Do you ever get tired of those LED flashlights you find in checkout lines, that have no appreciable optics, no power supply circuit, run dim or flickery after the first few hours of use, and require three AAA batteries in that funny plastic holder? We do!

In lieu of this sad state of LED flashlight affairs, we sourced a reliable basic flashlight, made with reputable parts, operating with one super-bright diode, and one AA battery. In doing so, we picked up some bonus features as well!

•Cree® Q5 White LED Diode
•Rated at 3W, and 250 Lumens
•Efficient Switching Power Supply
•JUST ONE AA or 18650 Lithium Battery
•Durable Aluminum Case
•Adjustable Focus PMMA Optics, Capable of Floodlight or Beam Mode
•Three Settings, Full Bright, Half Bright, and Strobe
•O-Ring Seals for Water Resistance

Fantastic gift for any outdoors type, or just to keep on the bedside table. Use our Glow Keychains to find them at night!

Cree SK68 3W UV 395nm Flashlight

Same as our excellent white SK68 flashlights, but with a powerful 395NM UV beam, perfect for charging all of your glow projects, and all of our glow products!

•Cree® Q5 UV LED Diode
•Rated at 3W of 395NM light
•Efficient Switching Power Supply
•JUST ONE AA or 14500 Lithium Battery
•Durable Aluminum Case
•Adjustable Focus PMMA Optics, Capable of Floodlight or Beam Mode
•O-Ring Seals for Water Resistance

Fantastic gift for any enthusiast of forensic sciences, fluorescence, glow products, or any other sector of science or art requiring portable, powerful, UV Light!

Glow Pebbles, Purple, 10pcs

The package of a standard 5mm LED, but, a set of two, the clear one of which emits 940nm infrared, the black one acts as a photodiode for the same wavelength.

These components in tandem can be used as an optical interrupt gap, such as an RPM counter, a limit switch, or even elementary IR remote control. Operating specs are as follows:

Power: 0.15w
Receiving Angle: 40 degrees
Forward Voltage: 1.3-1.4v for emitter, 1.1-1.4v for photodiode
Wavelength: 940nm
Maximum power: 70 mw
Maximum forward current: 30ma
Maximum reverse voltage: 5v
Maximum pulse current peak: 75ma


Each purchased unit will come with one emitter and one receiver.

LED, 395nm UV, 5mm 30° Beam

Classic 5mm LED package, emitting 395nm UV for all your blacklight needs. Ratings as follows (in no particular order):

�Forward Voltage:3.0-3.4
�Max Current: 30mA
�Package: 5mm, 30° Beam
�Really, what else can I say about an LED? I think we've all seen them.

Photoresistor, 5mm

A nice basic cadmium-sulfide photoresistor, used in detecting light. Specs are as follows.

•Full-Sunlight Resistance: <200Ω
•Full-Dark Resistance:>2MΩ
•Max power dissipation:50mW
•Max voltage: 100v

Solar Panel, 4V, 80mm x 17mm

We got sick of our old silicon cells that were impossible to solder or use for anything, so we stocked these durable epoxy-sealed miniature solar panels instead!

•4V at 25mA in full sunlight
•80mm x 17mm x 3mm ± 0.5mm thick
•4.5g weight
•EASY TO SOLDER COPPER PADS